GTV Injector

[calindinulet]

Hello guys.
Please tell me if you know where can I find in Brno some service where they have the injector cleanning machine?
THX.

[Pribina]

Hello guys.
Please tell me if you know where can I find in Brno some service where they have the injector cleanning machine?
THX.

Hi, try official Alfa service - Motortec

[Chevron]

There is a some contact information

SERVIS ALFA ROMEO
Maříkova 21 (u Globusu)
621 00 Brno
Tel.: 549 429 231-2
NON STOP servis: 606 347 667
E-mail: servis@motortec.cz
Provozní doba: Po-Pá 7.00 -18.00 hod.

[calindinulet]

I tryed there but those guys from official alfa service are crazy.
Just to check the injector - 1000 kc
servis per hour - 800 kc
1 injector - 7 000 kc
It is too expensive there

That's why I asked you about another service
I am searching for 1 service which have this ultrasound machine for cleaning the injectors.
If you find something please help me.

Have a good time today in car arena!!! I can not comme because I am working. Sorry.

[Pribina]

I tryed there but those guys from official alfa service are crazy.
Just to check the injector - 1000 kc
servis per hour - 800 kc
1 injector - 7 000 kc
It is too expensive there

That's why I asked you about another service
I am searching for 1 service which have this ultrasound machine for cleaning the injectors.
If you find something please help me.

Have a good time today in car arena!!! I can not comme because I am working. Sorry.

800kc per hour? I don't think so . . . I make all services with my Alfa there, might be they tried it when they saw you're not Czech

[.mycTD]

Pribina: what's their rate per hour from your experience?

btw jetservis v HK ma 250,- za vstrik vcetne protokolu a 350,-/hod za montaz/demontaz. a rozhodne to nejsou zadni amateri. je to teda trochu z ruky, ale jen pro srovnani cen.

[calindinulet]

so...in the end...i find a service for cleaning the injectors in Blansko (if you need the name and the adress i will tell to you), the pryce for 1 injector is 500 kc.

In the end my injector is ok... this is bad, the spark is ok allso and the electric part is also ok...the problem is in the ingine...the service guy told me that my valves have problems (blocked, not good, dead).

In Brno service Alfa Romeo ...they ask me minimum 20 000 kc for changeing 4 valves....it is normal...or because I am not a chech guy... ... 20 000 kc for changeing 4 valves....

the pryce for 4 valves is maximum 4 000 kc...and the rest of 16 000 ????

I am so sad


PLEASE TELL ME ABOUT ANOTHER SERVICE MORE CHEEPER! THX.

[.mycTD]

don't you know, how many valves are dead? 2valves on 2cylinders?

[Pribina]

Pribina: what's their rate per hour from your experience?

btw jetservis v HK ma 250,- za vstrik vcetne protokolu a 350,-/hod za montaz/demontaz. a rozhodne to nejsou zadni amateri. je to teda trochu z ruky, ale jen pro srovnani cen.

Have to look on invoice but I think half . . . 400czk

[calindinulet]

today i findet out that 3 pistons loose presion, but i do not know how many valves are bad.
I will put the car in service and then i will know.

[Pribina]

So yesterday I picked up my Alfa from Motortec and hour charge is 550CZK

[calindinulet]

so...that means that they see that i am not czech guy and they are asking double pryce...

those days i will take my car from one little server
I had to change:

- 1 ventil
- polish 15 ventils + 16 sears of ventils
- change transmision belts + transmision roles
- change whater pomp
- change sparx
- oil + filters + antifreese liquid

+ service
= 25 000 - 30 000 kc

[Richie]

hm..lot of many

[calindinulet]

yes..
Maybe today I will take out the car from service

[.mycTD]

reasonable price, i think.

timing belt with equipment (rollers, water pump, ...)........ cca 10.000 - 15.000,- czk
spark plugs (set 8pcs) ................................................. cca 6.000,- czk
oil: e.g. my 10w60 from motortec = 500.-czk/l = ........... cca 2.500.- czk + antifreeze

overall almost 25.000,- without valves

for cost comparison look at e-per: http://www.spangerum.com:7080/navi?COUN ... G=3&RMODE=